Explosive

FIXOR™ BINARY EXPLOSIVE - 500ml / PN 1-91-01

FIXOR™ is comprised of two plastic bottles. One bottle contains
FIXOR™ Liquid (flammable liquid); the other bottle contains
FIXOR™ Powder (inert powder). When the FIXOR™ Liquid is poured into the bottle containing the FIXOR™ Powder , and the bottle is shaken, a detonator sensitive FIXOR™ Binary Explosive is formed. Unlike ammonium nitrate based two-component explosives and traditional explosives, FIXOR™ self-neutralizes after a period of time, becoming a non-explosive. FIXOR™ of anti-personnel and anti-tank mines as well as Unexploded Ordnance (UXO). FIXOR™ 500ml is capable of sending its shock front through various materials including thick walled, mortar and artillery shells. It comes packaged in its smallest form with 48 bottles of FIXOR™ Liquid per UN approved small drum plus 48 bottles of inert FIXOR™ Powder per box. When FIXOR™ Binary Explosive is used with the 500ml bottles all topped up and set horizontally opposed and fired simultaneously, it allows for destruction of a multitude of conventional munitions.

 

Electronic Initiation Systems

Contains FIXOR™ Liquid (flammable liquid); the other bottle contains FIXOR™ Powder (inert powder). When the FIXOR™ Liquidis poured into the bottle containing the FIXOR™ Powder , and the bottle is shaken, a detonator sensitive FIXOR™ Binary Explosive is formed. FIXOR™ 3.8L is provided with MREL’s complete line of AquaRam™and EZCore™ Tactical Disrupters. MREL is the only company in the world that provides the disrupter energetics in combination with the disrupter. Each of MREL’s Tactical Disrupters has been designed to accept partial bottles and up to 4 bottles of the FIXOR™ Binary Explosive which allows for precise and rapid loading of disrupters. For MREL’s customers, explosives storage logistics are eliminated when FIXOR™ Liquid and FIXOR™ Powder are stored separately. Training is reduced because all of MREL’s Tactical Disrupters are compartmentalized and Bomb Technicians simply ‘pour until full’ with FIXOR™ Binary Explosive to load.

Remote ANSWER BACK Initiation System Smart-BFAS

The AquaRam™ Micro Tactical Disrupter has been specifically designed, tested and verified as a rapidly deployable, effective tool for reliably disrupting explosive threats ranging in size from suspicious packages to passenger vehicles. The smallest of three AquaRam™ Tactical Disrupters, the AquaRam™ Micro Tactical Disrupter propels a coarse focused water slug of 1.0L capacity. The 1.0L of water is wrapped on five sides with pre-measured, pourable FIXOR™ Binary Explosive.
AquaRam™ Micro Tactical Disrupter is ideal for attacking the switching mechanism of any IED or large backpack to large suitcase size devices – it takes over where the barrel disrupter starts to fail.

EZCORE™ 500 TACTICAL DISRUPTER

EZCore™ 500 Tactical Disrupter is the smallest of MREL’s Tactical Disrupters; however it is the most utilized of the EZCore™ TacticalDisrupter line.
This small charge has multiple applications. It is a tremendous device that allows for access of vehicle trunks and is capable of stripping soft skin bags away from identified pipe bombs. This allows the EOD technician to take a precision, if not surgical, shot of the end caps of the device. EZCore™ 500 Tactical Disrupter is simple in design and simple to use.
With the simple action of adding water, pouring the pre-measured amount of FIXOR™ Binary Explosive into its core, and inserting a detonator, the EZCore™ 500 Tactical Disrupter becomes a very effective tool against the terrorist device.

EZCORE™ 1G TACTICAL DISRUPTER

EZCore™ 1G Tactical Disrupter is known as the ‘Baby HEADD’ in the EOD community and has been identified as a favourite by EOD and Bomb Technicians worldwide.
EZCore™ 1G was designed to be the ideal choice for terrorist devices laid at soft targets such as train stations, bus stations,
etc. This Tactical Disrupter is one of the fastest tools in the MREL inventory to charge, deploy and fire to the terrorist device/threat with a small amount of explosives. EZCore™ 1G Tactical Disrupter is not limited to the use of just water as an ejecta, you can substitute materials such as sand, dolomite, gravel, etc. in order to produce various positive effects.
Like many of MREL’s other tactical disrupters, the EZCore™ 1G Tactical Disrupter can be used in a two or three barrel configuration where all the tactical disrupters are fired simultaneously to allow for the effective disruption of larger sized terrorist devices while utilizing smaller amounts of explosives.

 

EZCORE™ 5G TACTICAL DISRUPTER

EZCore™ 5G Tactical Disrupter has been designed to compare to the in-service ‘Mini HEADD’ charge known to many North American EOD and Bomb Technicians; however MREL has designed this tool to have increased jet tip velocity through an increased core diameter design.
EZCore™ 5G Tactical Disrupter is best used against threats contained in small panel vans and in two or three barrel configurations in a single storey.


The EZCore™ 5G Tactical Disrupter is a very effective tool and can be delivered by all deployment systems.

EZCORE™ 15G TACTICAL DISRUPTER

EZCore™ 15G Tactical Disrupter can be identified as an eective alternative to the well known ‘Mini HEADD’.
When positioned in a two barrel configuration, the EZCore™ 15G Tactical Disrupter simulates the energy output of a ‘Quad Mini HEADD’ shot. The sole purpose of this design was intended to reduce the number of initiation sets required to fire simultaneously. As with the design of all EZCore™ Tactical Disrupters , one is not limited to the length of the core; therefore the characteristics remain the same over the entire length of the tactical disrupter.
MREL Group of Companies Limited is the only company in the world that can make this claim. The EZCore™ 15G Tactical Disrupter has the same Net Explosive Weight as that of the AquaRam™ Max Tactical Disrupter.  If general disruption tools are your requirement, than the EZCore™ 15G Tactical Disrupter is the ideal choice for a high energy output system.

TORPEDO MINI TACTICAL DISRUPTER

The EZCore™ Torpedo Mini is an effective alternative to the use of a cluster of traditional “Mineral Water Bottle” disrupters for in-cab overpressure charges and the traditional “Bootbanger” and “Trunk Trasher” disrupters for disrupting/neutralizing IEDs contained in the trunks of vehicles. The EZCore™ Torpedo Mini was designed to give a longer line of cut than the EZCore™ 1G Tactical Disrupter. The EZCore™ Torpedo Mini has the same jet tip velocity characteristics of the EZCore™ 1G and EZCore Torpedo Max Tactical Disrupters.  Due to the design of the EZCore™ Torpedo Mini, it has a longer core and double the length of the EZCore™ 1G Tactical Disrupter and can be fired horizontally or in a vertical plane. This system is best used when placed side by side in a two or three disrupter configuration providing one or two extreme lines of cut.

TORPEDO MAX TACTICAL DISRUPTER

The EZCore™ Torpedo Max Tactical Disrupter is an effective alternative to the traditional “MLVD” disrupter which uses various military explosive types to propel the water. Unlike the traditional disrupters when the Bomb Technician must cut, break down, roll, stuff and tamp into a core to prepare the disrupter for use, the EZCore™ Torpedo Max Tactical Disrupter is simply ‘pour until full’ with FIXOR™ Binary Explosive. The EZCore™ Torpedo Max is a very effective tool when attacking the circuitry of large vehicle bombs when the question of the terrorist device make up is unknown or suspected to be homemade explosives.
EZCore™ Torpedo Max is best utilized in a two or three disrupter configuration.

Entry Frame, GBF-1VF

Entry Frame, hinged, oval in shape, 1 inch deep loading “V” with run offs to allow tabbed shots on metal walls and/or metal doors. This frame has no metal bolts or fittings. It can utilize the folding pole system designed for this frame or the same prop pole used in the standard entry frame. It has rappel lugs top and bottom to allow for rappelling or lowering the charge onto the selected target using ropes. It has a sliding locking plate that allows
users to lock the frame in the open position, while allowing users to unlock and fold the frame up should it become necessary to remove the frame from the target being breached

The Folding Frame Carry Bag

The Folding Frame Carry Bag (patent pending) has been purpose designed to allow tactical carriage of the folding frame. It has been designed to allow users to load the frame with explosives and carry the loaded frame in a backpack that allows for operational deployment right off an operators back. The carry bag has reinforced webbing straps completely around the bag, providing great strength to the bag. This allows for rappelling or fast roping with the bag on an operators back, without having to worry about the bag tearing or ripping. The handle is made from reinforced webbing, and is extremely rugged. The interior of the bag allows for a loaded frame to be securely strapped into the bag, with the sectional folding prop pole being fastened across the inside of the folded frame. There are two interior pockets lined with ballistic material, to allow users to place detonators or selected initiation systems in the pockets for operations. The bag has two large zippers that meet and lock at the top of the bag, allowing for rapid opening.

GP-1VS

GP-1VS main charge compatible explosives for loading:

  • Sheet Explosive - various widths and thickness, RDX or PETN based

  • Linear Shaped Charge - 100 gr./ ft. (20 g/ m) to 2200 gr./ ft. (500 g/ m) copper or lead clad

  • Detonating Cord - 50 gr./ ft. to 500 gr./ ft. (10 g/ m to 110 g/ m)

Extrudable Explosive - RDX based (DEMEX 100) or PETN based (DEXS)
The Gun Port Frame uses the same prop poles as do the standard GBF-1VS frame and the GBF-1VF Folding Frame
GP-1VS breach point dimensions:
HBA Engineering Gun Port frames produce an opening about the size of the frame’s outer dimensions, depending on the target material being penetrated and the explosive load (approximately 16 inches x 16 inches (40 cm x 40 cm).

 Entry Frame GBF-1VS

HBA Explosive Entry Frames are specially engineered containers designed to facilitate structure breaching for
hostage rescue, counter-terrorism and special forces operations, through a wide range of target materials and
structural types. HBA Entry Frames may be used against targets such as: cinder block, brick and concrete
walls, as well as solid core wood doors, metal clad fire doors and security doors. It produces an entry hole approximately the same dimensions as the frame. The HBA Large Breaching Frame can use either a standard 2
piece pvc plastic prop pole or the Gryphon folding pole used with the Folding Breaching Frame

+972-3-6722226

  • Grey Facebook Icon
  • Grey YouTube Icon

© 2020 by HBA System Integrators