Forensics

Fingerprint Powders

Powders.jpg

antistatic, antistatic-l uorescent, magnetic

Methods of Application

brushes with natural hair, i bre glass, synthetic material or marabou (with or without feather duster) as well as with a magnetic brush

Application

on dry, non-sticky and smooth surfaces, e.g. glass, china, plastic, metal, paper as well as on coated or natural i nished wood

Iron Oxide Powder Mixture

Iron Oxide Powder Mixture.jpg

Mixture of iron oxide and adhesion intensii er. To achieve a perfect contrast to the

trace, use a suitable colour. 50ml and 100ml in aluminium tin, 250ml in plastic jar.

Carbon black Powder

Carbon black Powder.jpg

Is used for contrasting fingerprints of non-porous surfaces 
like porcelain, glass, metal, wood, coated surfaces and smooth paper 
(for recent traces)

Fluorescent Powder/ UV-Visualisation

Fluorescent Powder.jpg

Especially effective for coloured, structured and multi-coloured laminations

as packing, protective i lms and varnish. This powder can be seen even with

daylight. The contrast can be improved by using black light (approx. 365nm). We

recommend the use of an examination i lter yellow (470-520nm).

Evidence Markers

Evidence Markers.jpg

Evidence Markers (Tents) with L-Shaped metric reference scale and reticle 

 

plastic yellow, 75 x 75mm

Fibreglass Tape Measure Frame, 50m, BMI, glass fiber reinforced with plastic coating, 13mm (W)

Crown Cap tape measure.jpg

graduation on both sides in cm, high-impact plastic capsule park position for crank arm
BMI Ergoline

Photo Rulers for Macrophotography

Photo Rulers for Macrophotography.jpg

Photo Ruler with supplementary scale

side length 30 / 15cm and 30cm

made of plastic 0.7mm

Investigation Kit

Investigation Kit.jpg

Hard-top case, black, 490 x 365 x 195mm
with document compartment and tool holder

Blood/ Secretion/ Hair Traces kit

Blood_Secretion_Hair Traces.jpg

Disposable Scalpel Figure 21

Disposable anatomical forceps round, sterile, 12cm, individually packed

Bi-distilled Water in vial

Disposable Syringe 2ml

cannula size16 0.6 x 25mm

Paratex I/60 Interface for blood traces

Nail Scissors curved

Comb DNA-free, individually packed

EO-gas-l ushed

Transport Swabs sterile plastic stick

Cyanoacrylate Fuming Chamber VCA 300Lwith Touch-Panel

Cyanoacrylate Fuming Chamber.jpg

The cyanoacrylate fuming procedure is a good methode for securing of evidence of all objects with non-porous surfaces.

Due to the touch panel and its easy handling the fuming process can run through by automated operation or as before by manual operation – this can be individually chosen.

In both cases the user can optionally choose between standard or polycyano fuming.

The parameters for the standard fuming are pre-set at 130°C and 80% relative humidity, for the polycyano fuming (Art. No. 50637) the parameters are pre-set at 230°C and 90% relative humidity.

Optionally the chamber can be equipped with an UVCleaner 254nm (Art. No. 53660), that cleans the air from germs and bacteria and defragments DNA. An UVC-Lamp 254nm (Art. No. 53715) for decontamination of surfaces can be optionally installed.

Security and safety while handling the fuming chamber are of great importance. The extended safety measures are for example the automatic closure of the door from the beginning of the fuming process to the end of the air cleaning process.

Due to the integrated air cleaning system there is no need for a connection to an in-house exhaust-air system.

The display shows automatically if a changing of the cyan-filter or the filling up of the water tank (used for the creation of humidity) is needed

 Cyanoacrylate Fuming Chamber VCA 900L with Touch-Panel 

Cyanoacrylate Fuming Chamber VCA 900L.jpg

 The cyanoacrylate fuming procedure is a good methode for securing of evidence of all objects with non-porous surfaces. 

Due to the touch panel and its easy handling the fuming process can run through by automated operation or as before by manual operation – this can be individually chosen. 

In both cases the user can optionally choose between standard or polycyano fuming. 

The parameters for the standard fuming are pre-set at 130°C and 80% relative humidity, for the polycyano fuming (Art. No. 50637) the parameters are pre-set at 230°C and 90% relative humidity. 

Optionally the chamber can be equipped with an UV-Cleaner 254nm (Art. No. 53660), that cleans the air from germs and bacteria and defragments DNA. An UVC-Lamp 254nm (Art. No. 53715) for decontamination of surfaces can be optionally installed. 

Security and safety while handling the fuming chamber are of great importance. The extended safety measures are for example the automatic closure of the door from the beginning of the fuming process to the end of the air cleaning process. 

Due to the integrated air cleaning system there is no need for a connection to an in-house exhaust-air system. The display shows automatically if a changing of the cyan-filter or the filling up of the water tank (used for the creation of humidity) is needed